Condition: Brand New
Package: One adapter
Works for: Sony alpha a100, a200, a350, a700 (all current Sony DSLRs), and old Minoltaa5D, a7D DSLRs
Material: The adapter is made by copper with chrome coating which is better and stronger than made by aluminium.
Description:
a. Basically it is an emulator of Minolta/Sony system AF lens, by attaching a 'smart' PCB chip on a conventional lens mount adapter.
b. Whenever your subject gets in focus, the AF confirm indicator will light up for your notice.
c. IS function work as well as Sony AF Lens.
d. It support all focal length of stabilization.
e. It works for all length focal lens.
How to use:
a. Mount the adapter (with the lens);
b. Turn on the camera (motor will starts and make a few seconds noise, to self-examine) aperture value now will show as f1.7 (pre-set value);
c. Set the camera to whichever mode you want;
d. Aim your lens to the subject;
e. Whenever the subject is in focus, the AF confirm indicator in viewfinder will light up;
f. In general, 'AF confirm' will work for aperture value down to f/5.6 ~ f/8 (depending on lighting conditions), if you need to go further, focus above f/8 then stop down).