UID26426
阅读权限150
经验4170
胶卷0
相册0
日志0
记录0
分享0
性别保密
个人主页
金牌会员
精华
帖子1105
注册时间2009-4-25
在线时间1188 小时
最后登录2022-11-20
好友0
|
马上注册咔够,结识更多爱好摄影器材朋友
您需要 登录 才可以下载或查看,没有帐号?注册
x
小日本代购的1n买来就是bc出错的 网上查了一下 因为我这个是按快门的时候出现bc所以很容易解决
大概花了十分钟不到
具体看这个链接
http://eosdoc.com/manuals/?q=BCerror
regarding the "bc" indication.
i have found many eos-1 and eos-1n's that can be fixed fairly easy if the bc code appears immediately after the shutter button is pressed (meaning that there are no actions heard or noticed in the camera's machinery)and if repressing the shutter button to first (focus/exposure) position clears the bc indication.
this is caused by sticking mirror magnet or it's linkage.
to correct this you must remove front cover and clean affected area with no residue plastic safe cleaner.
inside camera front on left upper corner of the mirror box is the mirror magnet cover (little plastic cube).press in on this cube firmly toward rear of camera while pressing the shutter at the same time,this may take many tries.the shutter should trip and work properly.this is only to free up parts.
next carefully remove front face of plastic cube with an exacto knife(dont damage the magnet windings.
spray small amount of cleaner into cover pointing toward rear of camera,immediatelly press shutter and fire off several shots.if it fails repeat what you did at first(press magnet toward rear and press shutter when the bc is not displayed.let dry and repeat until shutter works reliably.dont over do it allow cleaner to evaporate between tries
看不懂等下再解释 |
|